Description
AgeSmart™
Provides age-adjustable fever guidance to take the guess work out of the interpreting temperature for the whole family.
Fever guidance
Large-color coded display provides instant fever detection for the whole family.
More accurate
Designed to minimize the cooling effect of the tip inside the ear canal, providing accurate measurements time after time.
Unique positioning system
ExacTemp® technology uses a light and beep to confirm proper positioning.
Night light feature
Helps take a temperature even when it’s dark.
Memory function
Recalls last 9 temperature readings.
Safe and hygienic
Eliminate the risk of cross-contamination and ensure accurate readings.
More accurate
By selecting Braun ThermoScan® 7, you are choosing the no.1 thermometer brand among doctors*. Thanks to its patented pre-warmed tip, Braun ThermoScan® ear thermometers are already regarded as a benchmark for accuracy, and are widely used and endorsed by doctors around Europe. The tip on other thermometers can cool the area where the reading is taken, which can lead to inaccurate readings. The tip on the ThermoScan® is warmed before use, to ensure professional accuracy. Plus, the ExacTempTM guidance system confirms the correct position and accurate reading with a light and a beep. Now with new AgeSmartTM technology Braun ThermoScan® gives you even more reassurance when it comes to interpreting your child’s temperature.
Braun Thermoscan®
Other thermometers
Remove the thermometer from the protective case.
Push the Power button.
Attach a new lens filter by pushing the thermometer probe straight into the lens filter inside the box and then pulling out.
Select age with AgeSmart™ button
as shown below. Press the button to toggle through each age group1.
Fit the probe snuggly into the ear canal.
Push and release the Start button.
The result is shown on the display2.
Press Eject button to remove and discard used lens filter, and put on a new, clean lens filter.
#1
1
#2
Error message | Situation | Solution |
 | No lens filter is attached. | Attach new, clean lens filter. |
 | The thermometer probe was not positioned securely in the ear. An accurate measurement POS = position error | Take care that the positioning of the probe is correct and remains stable. Replace lens filter and reposition. Press Start button to begin a new measurement. |
 | Ambient temperature is not within the allowed operating range | Allow the thermometer to remain for 30 minutes in a room where |
  | Temperature taken is not within typical human temperature range (34 – 42.2 °C or 93.2 – 108 °F). HI = too high | Make sure the probe tip and lens are clean and a new, clean lens filter is attached. Make sure the thermometer is properly inserted. Then, take a new temperature. |
 | System error – self-check display flashes continuously and will not be followed by the ready beep and the ready symbol. If error persists, If error still persists, | Wait 1 minute until the thermometer turns off automatically, then turn ... reset the thermometer by re-moving the batteries and putting them back in. ... please contact the service centre. |
 | Battery is low, but thermometer will still operate correctly. | Insert new batteries. |
 | Battery is too low to take correct temperature measurement. | Insert new batteries. |
Care and cleaning
The probe tip is the most delicate part of the thermometer.
It must be clean and intact to ensure accurate readings.
If the thermometer is ever accidentally used without a lens filter, clean the probe tip as follows: Very gently wipe the surface with a cotton swab or soft cloth moistened with alcohol. After the alcohol has completely dried out, you can put a new lens filter on and take a temperature measurement.
If the probe tip is damaged, please contact the local service center.
Use a soft, dry cloth to clean the thermometer display and exterior. Do not use abrasive cleaners. Never submerge this thermometer in water or any other liquid. Store thermometer and lens filters in a dry location free from dust and contamination and away from direct sunlight.
Additional lens filters (LF 40) are available at most stores carrying Braun ThermoScan.
Replacing the batteries
The thermometer is supplied with two 1.5 V type AA (LR 06) batteries. For best performance, we recommend Duracell® alkaline batteries.
❶ Insert new batteries when the battery symbol appears on the display.
❷ Open the battery compartment. Remove the batteries and replace with new batteries, making sure the poles are in the right direction.
❸ Snap battery door into place.
